| |
Click on image for the lowdown. 
====
| | |
1 members (1 invisible),
46
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,043 Posts1,055,610 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#20468 02/10/2003 6:48 PM | Joined: Feb 2003 Posts: 5 Member | | Member Joined: Feb 2003 Posts: 5 | Hopefully someone out there can help me. I am rebuilding a '68 1/2 ton 2WD Suburban. I have the front end all apart in preperation for drop spindles and front disks. While I am at it, I am replacing all the wear items. I am completely stumped by the control arm bushings though. On dissassembly, I can not figure out what is the actual bushing. The end nut seems to have a shoulder that fits inside the bushing area of the control arm. Is this shoulder the actual bushing? It seems to be one piece with the end nut. How do you determine if it's worn and how do you replace it?
Any help would be greatly appreciated.
Paul
P.S. I guess I'm an honorary stove bolter, my boat has a '72 250 L6 driving an OMC leg. 2 barrel carb to boot! | | |
|
|
| |
