| |
Click on image for the lowdown. 
====
| | |
9 members (Hotrod Lincoln, 52Carl, Forty9, walter74, klhansen, HandyAndy, cmayna, 55shaker, TPR57C),
137
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,114 Posts1,056,282 Members48,439 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#19437 11/07/2002 5:18 AM | Joined: Feb 2001 Posts: 1,897 Member | | Member Joined: Feb 2001 Posts: 1,897 | I do not recall if the spindles are the same diameter.If no one gives and educated/experienced answer ,call an auto parts store and see if the bearings are the same.If they are, they should swap ok  One more thing to consider, the front brakes on a 1-ton are 12 inch and the ones on the 3/4-ton are 11 inch.You will need to swap the backing plates to fit the smaller drums if, IF they will fit the spindles 
There is enough good in the worst of us and enough bad in the best of us that it does not behoove any of us to criticize the rest of us.
-
-
Be yourself. If you are ever lost, It will be much easier to find yourself if you know who you are!
| | |
|
|
| |
