| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,049 Posts1,055,740 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| | | Joined: May 2001 Posts: 7,438 Extreme Gabster | | Extreme Gabster Joined: May 2001 Posts: 7,438 | Things I don't like about the replacement door handles:
1) The hole in the handle is too small for the lock retainers. I thought first it was because of a little surface rust on the retainers so I filed it off. Still no go. I ended up reducing them with a grinder.
2) The slot for the clip that holds the retainers in is cut too deep. The clip is almost buried in the slot.
3) The original clutch head screws can't be used to attach the handles. They have metric threads. I have nothing against metric bolts and screws but I don't like mixed use. If it's SAE it should be all SAE and vice versa.
What are your thoughts on the matter? | | |
|
|
| |
