| |
Click on image for the lowdown. 
====
| | |
3 members (TexasJim50, baldeagle, 1 invisible),
91
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,018 Posts1,055,340 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2005 Posts: 311 Shop Shark | | Shop Shark Joined: Mar 2005 Posts: 311 | I have a 49 chevy 3100 truck with 54 chevy 3100 spindles. I was going to replace the kingpins, but I noticed that both NAPA & Autozone have different part numbers. When I drove the kingpins (49 & 54)out of the respective trucks, I measured and they were both the same (.861" diameter and 6.325" long). I was able to look at a NAPA kingpin for the 49 truck but it was about .200 short. Also, where the locking pin mates to the kingpin looked different. NAPA looked like |__| in profile, while mine looked like \___/ in profile. Can somebody help me figure out what kingpins I need?
Thanks in advance.
Always get a 2nd opinion, especially if I am the source of the 1st opinion.
| | |
|
|
| |
