| |
Click on image for the lowdown. 
====
| | |
0 members (),
61
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,024 Posts1,055,395 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2005 Posts: 144 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2005 Posts: 144 | I'm converting my 46 Chev 1/2 ton over to a set of modern shocks as the old lever style shocks are shot. I welded a set of universal lower mount brackets onto the rear axle and am going to weld a crossmember on top for the top mounts. Does anyone know how do I determine the proper shock to mount. Do I measure the length. A chassis rebuild book says they have to be mounted a minimum of 30 degrees of angle and 20% of further travel beyond the frame sitting level on the leafsprings. Any info would be appreciated. bobt | | | |
Entire Thread
|  
Rear shocks
| bobt | 08/23/2005 3:18 PM | |
|
|
| |
