My son and I are starting our 57 panel Project. We bought a 77 K5 Blazer for the frame and drive line. (Yeah its a 350... and I know you don't all approve) I don't have a problem lengthening the wheel base 7-1/2" but the front tread width is about 6" wider on the K5. (The rear should be fine.)

I noticed that the rims on the K5 are very deep... (I don't know how to explain it) the mounting surface is such that the tires are off center to the outside.

Are there any stock rims readily available to change the offset and narrow the tread width?

Also, will it look strange with different rims on the front than the rear?

IRWIPI 2005 Peoples Choice
Inky,
"It's not that I haven't done IT... It's that I haven't done IT yet."

--------------------
'48 1-1/2 ton Dump
'57 Chevy Panel
'59 Chevy 2 ton Dump