Baldeagle,
The alignment I'm refering to is in the factory assembly manual under the heading trans. It tells the proper adjustment of the shift rods, etc. I can take off from a dead stop in 1,2, or 3 rd gear. I just can't shift from 2 to 3. I can shift from 1 to 3, then down shift to 2. But, then I have to come to almost a complete stop to shift back out of 2 (either to 3 or just to neutral). Double clutching doesn't work. It does not jump out of 3rd or anything like that. Like I said I can shift it smoothly through the gears sitting still. The linkage has a little play in it but, I've driven trucks with much worse. When driving in 2nd it grinds if you try to shift, kinda like if you weren't using the clutch at all. But, it will not come out of 2nd unless you are almost completely at a stop.
