| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,088 Posts1,055,993 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Sep 2003 Posts: 66 New Guy | | New Guy Joined: Sep 2003 Posts: 66 | I took 6 inches out of my gm tilt column, I also did as Joe mentioned cut the outer portion higher to make cutting the inner easier. When i welded the inner shaft back together i inserted a 3/4 inch rod into the shafts and drilled and plug welded the pieces together. I also had to relocate and modify the high beam switch and linkage as I am using all the swithes on the column......Good luck, Dale
1939 GMC
1953 HD PANHEAD
1930 Chevy 3 window coupe
| | |
|
|
| |
