Heat up the area around it, let cool, and maybe give it a second heating and cooling. Brass will expand faster than the cast iron, so it needs to cool off. It's a pipe thread, so once it cracks loose, it should come right out. If you twist it off, don't drill it out till you try an easy out. Most brass fittings come out before extensive drilling is needed. If you must drill, go big enough to start a pipe tap and just rethread it, the tap should pull out the remaining fitting pieces, do go any deeper than necessary. Plug it next time, no real need for a petcock. I never could get mine to quit seeping, it now has a plug.