November 19th 2026 Jon Carey picked me up at the BillyBob Shop on Sunday morning to go to coffee and donuts at Dave Sexton's barn in Davie. He brought the Latham adaptor with him and he turned that aluminum slab into a thing of beauty. When we came back, we mounted it on the nailhead and he made measurements for the front support which is the next task. He also thought an o-ring was a better solution for mounting the oil filler tube in the cast valley cover than my JB-Weld idea so he took the valley cover and tube with him when he left.
[IMG]
https://www.laroke.com/larryk4674/2026/ds111926am.jpg[/IMG]
The '67 Camaro Z28 thermostat housing arrived on Monday. I think it might fit if it doesn't block the support rod. We will have to see which is the best water neck solution when Jon gets done with the elongated front support bracket for the Latham. The OEM nailhead housing still might work. My preference, in order, is nailhead, Camaro and lastly, Summit.
[IMG]
https://www.laroke.com/larryk4674/2026/ds111926bm.jpg[/IMG]
Back to the magneto spark plug wires. I am not happy with the Pertronix 8mm wires. They are too tight. I can only get 1/2" to 5/8" of the insulation into the magneto cap. That leaves a lot of bare wire between the insulation and the screws for a few of the terminals. Also do not like the large molded straight plug terminals (should have ordered angled terminals). Sometimes, you have to do something wrong to get it right the second, or third, time around. Learned early in my architectural career that "There's never time to do it right but there's always time to do it over."
Searched for 7mm magneto spark plug wires but all I was coming up with was motorcycle and garden tractor kits. Turned back to the Chevy magneto that came with the Latham again. It has Packard 440 plug wires, a vintage performance wire that old skool gearheads will recognize. Searched for that and a replacement is available at $8.95 a foot. In for a penny, in for a pound. Paid $1,500 for the magneto. This is no time to choke. Ordered 28 feet and we will roll our own spark plug wires when it gets here.
Pulled one of the Packard 440 wires out of the Chevy magneto cap and got another surprise. The wire was not stripped. The terminal screw was run right thru the insulation to make contact with the core. Back When I mistakenly removed the terminal screw, I saw that it was pointed and it makes sense to me now. I plan to do the same. Beer of the day is Peak Organic Brewing Company's IPA India Pale Ale. Background music was Emerson, Lake & Palmer's The Return of the Manticore box set.
[IMG]
https://www.laroke.com/larryk4674/2026/ds111926cm.jpg[/IMG]