The manifold designed for the donut has a 45 degree chamfer on the inside diameter, and the exhaust pipe should have a corresponding flare at the end of the pipe. The companion flange that clamps the pipe to the manifold slides freely on the pipe and it does not touch the manifold. Exhaust pipes intended for earlier manifolds that use a flat gasket have the flange welded to the pipe, and it sandwiches the gasket tight between the manifold and the flange.
These double height brass nuts help the flange stay tight:
www.ebay.com/itm/134070873892?Most auto parts stores stock them, so there's no need to mail order. The thread size is 3/8-16.
Jerry