Rubbed on the driver door a little. It is stained from a roof leak. Used a magic eraser. Tried some degreaser sparingly. It’s not like it’s a show winning paint job at all but I don’t want to make it any worse. Fuel is leaking from the one inch sized fuel inlet screw(not sure the proper term, someone clue me in) that screws into the carb. It’s the one that the flared hard fuel line is piped in to.I think the washer is brass. Not sure if replacing that washer will stop the leak. Definitely wouldn’t hurt to replace the little piece of hardline coming off of it either. Tried removing it. Need a vise. I did wrench the one inch port down when putting it back on. Still dripping. Immediate goals are addressing that leak, thoroughly inspecting brakes and making adjustments and or repairs.
