Originally Posted by Ponchogl
... if possible maybe you could measure from center of tranny case to center of master cylinder.

I hooked the tape measure on that little fill plug fitting. Looks like it's about 7 1/4 inches.
Attachments
IMG_1779a.jpg (144.85 KB, 49 downloads)

Last edited by UtahYork; 03/15/2026 6:59 PM.

~ John in Utah
1946 1/2Ton w/4-speed manual transmission w/1960 235 engine
Here We Go
Follow in his DITY Bay

- If you think about it, it has been one year ago today!