What are these holes for along the bottom of the tailgate? I've looked at them for several years and didn't think a lot about them until I mounted my new 1950 Georgia license plate yesterday.
They appear to be factory made because they are seem to be too perfect and too precisely spaced to have been done with a hand drill.
The only thing weird is that they are not symmetrical or centered with the tailgate. They are 6 and 1/4 in from the edge of the tailgate on the right and four and 5/8 in from the edge of the tailgate on the left. However they are all perfectly 7 and 7/8 inches on center.
The smaller hole to the bottom right of the line of holes is obviously drilled by some farmer. It's verysloppy and the metal is all gunched up around it. The "factory" holes are perfectly smooth.
1950 Chevrolet 3100 (Ol' Roy)
1939 Packard Standard Eight Coupe (The Phantom) | 1956 Cadillac Coupe de Ville (The Bismarck) | 1964 Ford Galaxie 500 coupe |1966 Ford Mustang (Little Red) | 1969 Pontiac GTO (The Dishpit) I 1979 Ford F-100 | 1976 Ford F-150 (Big Red) | 1995 Ford F-150 (Newt)
