We have a few that were made some time ago at the shop. Simple tables. 1/2" top plate, maybe 4'x4'. Legs welded to the underside. Large steel casters. Some have nuts welded to the legs to allow bolts to be used as feet and get the wheels off the ground. Some have a small piece of round welded between the top of the legs for hanging "C" clamps on. Some use heavy square tubing inside other square tubing for adjustable legs. That way you can adjust the height of the table. Nice thing about the steel top is you can weld jigs to it for a job. Then grind the table smooth when done. You can catch one of our welding tables in the lower right corner of this pic.
http://www.bunchobikes.com/1952suburban17.jpg All the clamps are hanging on that backside. More pics:
http://www.bunchobikes.com/1952suburban22.jpg http://www.bunchobikes.com/1952suburban36.jpg upper left.
In this pic is a corner of a welding table made with 2" plate, 2'x2' on a grinder type of pedestal. Right center of pic, above transmission:
http://www.bunchobikes.com/1952suburban29.jpg The bottom of it in the upper left of this pic:
http://www.bunchobikes.com/1952suburban27.jpg Yeah, I know, not a lot of good pics. But then again, my focus was the 'burb!
