I realize you just asked how to do it and not should I do it. It's really hard not to think we should save you from what many feel is a waste of time and money. So anyway........the answer was given, study the internet. Which you are doing here in the HiPo shop. As said, there are many videos and various kits. Some may be bolt on, some may need welding. You will need to de-rivet some things. The companies have good instruction. Just be sure they support a 1946 pick up. Good if members here have done this to that era.


The opinion aspect:
1. As you can start to see it's the same answer as when you asked about coil over shocks in rear and decided not to do that.
2. Yes, 4 link is a HiPo upgrade and belongs in the HiPo shop.
3. A 46 pick up with a 6 cylinder is not a HiPo vehicle. Albeit a 292 is a big 6. Hence why some are asking what your goal is.
4. I don't know what rear end you have but you don't have a muscle car, a street racer, tuner or a drag truck.
5. You may be like all of us, we've had SBC and BBC and still like that experience for sure. It's fun to build a DIY "performance" car/truck. Most of the Stovebolt is old trucks kept mostly original and some restomods. But we do have a HiPo shop and plenty of help.
6. If you are leaning to a performance truck, you need a V8. That's what you start with. To make a 6 into a "performance" motor that will "move" a 46 truck into High Performance. you need money and a lot of work. A V8 is already there and plenty of easy/cheap upgrades.
7. The members here in the HiPo Shop will be glad to help you do whatever you want to do. Again, I realize you just asked how to do it. So we can stick to that. (unless you wish to discuss the cost/performance "benefit" of doing 4 link in your case)
8. A 4 link is to handle Hi output speed and acceleration. Overall handling and "stability".

Last edited by bartamos; 03/01/2025 7:49 PM. Reason: clarification

Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn