I have a delta floor model drill press very similar to the bench model and have the mortising attachment. I built a farm table and allot of the joints were assembled using mortise, tenon and dowel joinery. Woodworking is my second love!

Here are a few pictures. First two were making the mortise, next making the tenon. Fourth is the slot and tenon for the bread board. Last is the completed table.
Attachments
IMG_1583.jpeg (217.55 KB, 98 downloads)
Farm table joinery (1)
IMG_1589.jpeg (116.08 KB, 98 downloads)
Farm table joinery (2)
IMG_1591.jpeg (181.81 KB, 98 downloads)
Farm table joinery (3)
IMG_1609.jpeg (152.38 KB, 99 downloads)
Farm table joinery (6)
IMG_1605.jpeg (148.08 KB, 98 downloads)
Completed farm table

Last edited by Phak1; 12/01/2024 2:13 AM. Reason: Typo
Phil
Moderator, The Engine Shop, Interiors and Project Journals

1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube
Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes
Project Journals
Stovebolt Gallery Forum