Rebuilding a 1950 3100 stock. My window crank on the drivers (left) side will not roll up all the way. It would not close up at the top right curve on the window. Replaced with another crank/regulator and it was even worse. It would stop about an inch from being completely up.
Notice the right roller arm which holds the track that the window mounts to was bent a little downward so straighten and even tried to add a little bend the opposite and that helped slightly.
Totally lost at this time. Any suggestions?
BTW if I'm on the wrong page for posting this someone please direct me where to go.
Last edited by Peggy M; 07/13/2024 6:05 PM. Reason: added more info to the title
