The Stovebolt Site Forums The Parking Lot Big Bolts 1965 C60 pinion oil seal and felt washer

I will link you to a different thread with this info

https://www.stovebolt.com/ubbthread...inion-seal-part-numbers.html#Post1486692

When you are using the liquid gasket maker, be sure to add some to the bolt threads themselves along with the mating surface and full around the bolt holes on the mating surfaces. The bolt holes that go into the axle housing are through holes and the back sides are open to the inner housing, thus if only torqued and not sealed, the bolt holes themselves will seep gear oil very slowly.