Wow! Thanks for all that good advice. I got it on as described with heat & wood & a mallet. It bottomed out. I viewed before removing pictures, that helped a lot. If it goes on any further it will be rubbing the cover. The shaft was never to the end of the HB. I also tried to keep the wood in the center section. I’ll post a picture & hope I didn’t screwdriver something up!
Last edited by glennj3; 10/03/20236:11 PM.
1953 Chevy 153A 3/4-ton Working on my project since 2015 Follow along in my DITY
