| |
Click on image for the lowdown. 
====
| | |
7 members (55shaker, Woodcmiami, Rusted Nut, Gdads51, CuzzFuzz, Still At It, 1 invisible),
156
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,138 Posts1,056,441 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2017 Posts: 230 'Bolter | | 'Bolter Joined: Apr 2017 Posts: 230 | epoxy primers are ment to seal and protect the metal from moisture. Your sanding off your protection...... If you stay within the primers recoat window.... See your data sheet..... You can spray on a heavy coat of surfacer and then sand that. Your choices now are to fully sand the existing primer then reprime then apply the surfacer..... some people use a etching primer if the sand through is small so they don't have to reprime. You still have the problem of future sandthroughs. Put on a heavy coat of surfacer and sand that using a guide coat. You can get a better finish and hopefully avoid the sandhroughs.
Mike
1940 Chevy 1/2 Ton presently... Almost done
1940 Chevy Business Coupe... In pieces
| | |
|
|
| |
