| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | |
2 members (J Lucas, 1 invisible),
45
guests, and
8
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,010 Posts1,055,299 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#14951 04/09/2005 3:11 AM | Joined: Jun 2004 Posts: 37 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2004 Posts: 37 | Now that I have my damper back and restored I am having the opposite problem when it slipped on easliy. Now after a little anti seize it goes on about 1 inch. I have been tapping with a heavy rubber mallett and a 3x3 piece of oak across the face so as to evenly distribute the striking force. But no go. The crank isn't tapped so I can't use my installer. How hard can you hit one of these before the crank shoots out the bellhousing?
Thanks everyone!
My rule of life: You can have anything you want; you just can't have everything you want.
| | |
|
|
| |
