Originally Posted by Mike B
Is the 3-speed trans a truck floor shift trans? If so it should bolt up to your bell housing.

I don't know if the floor hole is in the same location, but that would be an easy fix...

Mike B smile

Yes, all the 41-46 AK trucks were floor shifts. Base was the std 3sd with synchronized 2nd and 3rd gear. The optional transmission was the heavy duty 4spd with non-synchro on any gear. Straight cut gears with no synchros, not even on 4th gear.

Last edited by Dltalfa; 02/01/2023 2:33 AM.
Care taker of a 1946 1/2 ton. Pretty much period correct original. Danny T, from B’ham, Al