| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,095 Posts1,056,468 Members48,444 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2016 Posts: 1,990 'Bolter | | 'Bolter Joined: Feb 2016 Posts: 1,990 | I am currently re-assembling the front end of my '57 2 ton. I also wanted to use a modern wheel bearing seal, with dimensions in hand I researched the various bearing and seal sites, I also used the original factory part number to cross reference. I came up with several cross-reference P/N's and I also was able to find seals by dimension. I ordered 2 from my local independent parts store, they showed only one available, so I tried it. The rubber lip is way too tight on the "shaft", the outer steel dimensions are close but I didn't try to install it 'cuz it seems too big. I ended up ordering 2 original P/N felt style seals from Old Car Parts North West, waiting for them to arrive.
1957 Chevrolet 5700 LCF 283 SM420 2 speed rear, 1955 IH 300U T/A, 1978 Corvette 350 auto, 1978 Yamaha DT175, 1999 Harley Davidson Softail Fat Boy
| | |
|
|
| |
