Probably not noticeable in the photo (/s) but there is a slight gap under the straight edge, indicating the floor is out of flat. Just barely...like 1 1/2" !

Thinking I need to raise the cab by the roof to take pressure off of the floor where it rests on the frame. Anyone else have anything like this bad an issue?

Rest assured the rocker is only held in place by my hand on one end, not welded/tacked. The inner rear corner is fitted now.

Paul
Attachments
1.jpg (242.25 KB, 179 downloads)

Last edited by paul65; 11/25/2022 10:14 PM.
1951 3100 5-window
with a '55 235/floor mounted 3-speed
Some of the story in ODSS
Most of it in The Shops Area wink