| |
Click on image for the lowdown. 
====
| | |
0 members (),
87
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,030 Posts1,055,428 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2008 Posts: 4,961 'Bolter | | 'Bolter Joined: Jan 2008 Posts: 4,961 | 3/16" is ok or bias tires, but a bit much for radials. We do our own front end work on my fleet of trucks and I have turn tables. But many years ago I put a little grease on some tin and it worked quite well. After you get through setting the toe in, jack the front end up to where both tires are off the ground and let it back down. Measure your toe in again to see that you are still where you want it. | | |
|
|
| |
