Hi John,
The last I knew, Jim Carter had the same windlace everyone else is selling and the problem is the bulb part of the seal does not sit against the door frame when it is installed. It was run through the wrong die and the bulb side sits flat instead of sitting at a lazy "C" shape (which obviously would push it toward the door frame). Months ago I posted images showing the OEM stuff and what you can buy today. There's a notable difference. What needs to happen is a new die needs to be made so that the rubber can be run correctly. If the bulb doesn't connect with the door when the windlace is installed, it never will and nothing will be sealed. If Jim has some new style, please let us know. I've spoken with some of the vendors and from what I've been told everything out there is being made by one outfit (they haven't told me who). There is some on eBay that looks like it might possibly work but I haven't been able to get the seller to reply to questions. This is it:
https://tinyurl.com/y9ccbwhtAnd here is what everyone I've found is selling:
https://tinyurl.com/yckttjmeIt sort of looks like it might be ok but I've installed it and others here have also and no matter what we've done there is between 1/16" and 1/8" gap between the bulb and the door.
