Originally Posted by Fibonachu
Thank you Mick, that is helpful. The 53 is a bit smaller than the 59, but the ballpark numbers are helpful. I can cross-reference those to the 53 vehicle kit of heritage center to see if I can make sense of how they give values.

Any idea why the FR corner is so much heavier than the FL? Maybe the engine is offset to that side a decent amount?
That's a good question. I'm no expert on this but it does seem to be offset to the right. If you add a driver it might be closer. Here are the cross weights and front rear. I should have done it with me in it also.
#1 rear right / front left
#2 rear left / front right.
#3 left / right
#4 Front / rear.
I hope I got the order right. Thank you for your time.
Attachments
truck scale rear right, front left.jpg (201.29 KB, 46 downloads)
truck scale rear left, front right..jpg (199.31 KB, 46 downloads)
truck scale left, right..jpg (206.02 KB, 46 downloads)
truck scale front, rear.jpg (208.39 KB, 46 downloads)


Old enough to know better, too young to resist.