The Stovebolt Site Forums The Shop Area Driveline Front and rear sway bar install 1956 1/2

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

3 members (Otto Skorzeny, GMCJammer51, 1 invisible), 66 guests, and 6 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,180

Posts1,057,145

Members48,463

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Front and rear sway bar install 1956 1/2 sub57 #1419713 08/07/2021 2:44 AM
Joined: May 2005 Posts: 281 Oklahoma 5 59 fleet 'Bolter
59 fleet 'Bolter 5 Joined: May 2005 Posts: 281 Oklahoma	Both. I used a rear anti-roll bar from a 99 Accord, about 5/8 diameter, and it fits well. Mounted it on top of the frame just forward of the axle area and fabricated brackets to connect to the axle at the spring U-bolts area. The front bar is 7/8 diameter and came with the front sub-frame I used. The truck is very stable. Mark

Entire Thread
Subject	Posted By	Posted
Front and rear sway bar install 1956 1/2	sub57	08/06/2021 6:07 PM
Re: Front and rear sway bar install 1956 1/2	59 fleet	08/07/2021 2:44 AM
Re: Front and rear sway bar install 1956 1/2	Mike B	08/08/2021 1:26 AM
Re: Front and rear sway bar install 1956 1/2	sub57	08/08/2021 9:53 PM

Moderated by Dusty53, SWEET

Hop To

Link Copied to Clipboard