Jim, you use the stove wax on your Stutz too?
I'm told POR-15 sells a good quality header/manifold paint in silver. Haven't bought any myself yet (but likely will). Online at
www.por15.com , see for yerself. It's brush-on, not spray-on.
However! Prep is more important than anything for high temp parts. Sandblasting is strongly recommended - even fingerprints on the part before painting can cause problems later on. The POR-15 can or literature may have other recommendations.
-Boyo
[ 01-09-2002: Message edited by: boyoconnor ]
