Jerry,

Thanks for the guidance.

I’m not understanding the procedure to modify the manifold. What are the holes plugged with?

A simpler method would be to remove the studs from the manifold, drill and tap it for about a 5/8" thread, and plug the holes. Then use the TB gasket as a template and install studs the proper diameter, at the correct spacing.
Jerry[/quote]

My goal for using the double ended studs is to be able to return the manifold to the stock setup if the Sniper didn’t work out.

Dan

35 CC Case
38 Chevy Pickup
51 3100 AD
58 3100 Apache Fleetside