| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,180 Posts1,057,158 Members48,464 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2005 Posts: 8,983 Sir Searchalot | | Sir Searchalot Joined: May 2005 Posts: 8,983 | 16ga or 14ga works. Any color works. Colors don't matter on simple old truck wiring. Especially since you will be doing a new harness at some point. Colors are to be able to follow and trace (and to some, to be purely correct). Tracing is easy to do with our vintage trucks most of the time. Since you are adding the wires, you know where they will go. Don't sweat the small stuff. Adding a terminal block is a bad idea. It introduces a place for corrosion, can come loose, adds resistance and is unnecessary. Splice with crimp or solder and cover with shrink sleeve............best to run a whole new wire from switch to light if you can. That way at least you are using a continuous color.
Colors used on aftermarket turn signal switches don't always match colors used on wiring harness kits...but that's OK also.
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn
| | |
|
|
| |
