| |
Click on image for the lowdown. 
====
| | |
1 members (2-Ton),
92
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,093 Posts1,056,474 Members48,444 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2000 Posts: 1,969 'Bolter | | 'Bolter Joined: Nov 2000 Posts: 1,969 | Hi Wolfgang Is this on the 1953 3600 in your signature? If so, look here: http://chevy.oldcarmanualproject.com/shop/1948_51truck/51ctsm0410.htm The first few pages have the procedure for removing the axle shafts, hubs, bearings and seals and replacing them. Here in the US the seals are readily available since that same axle design was used for 20+ years in 3/4-ton and 1-ton trucks. Good luck.
Professional Novice
| | |
|
|
| |
