Yeah, the result of the customer that wanted to try his first welding experience with a wire feed machine. Was ground, V grooved, and then a pass made with the heat high and feed medium to smooth it all up. We are often asked to "touch up" welds but this Nova clip on a 50 Ford pickup frame still holds onto 1st place.

[img]https://i.postimg.cc/87JC0Szs/IMG-4136.jpg[/img]

[img]https://i.postimg.cc/1fDCcgpz/IMG-4137.jpg[/img]

Some of our welds on an MII cross member---usually use tig instead of mig
[img]https://i.postimg.cc/GHpNr3Y3/raise-MII-XM-003.jpg[/img]

Ground tig welds on Model A frame (no Bondo)
[img]https://i.postimg.cc/v4KtJfwM/Mod-A-Frame-007.jpg[/img]
[img]https://i.postimg.cc/SJ3XqrRZ/Mod-A-Frame-008.jpg[/img]


Evan