So have been working on the front on the front end sheet metal alignmnet on my 52 Chevy 3100 after the advise from Master Gabster. So I aligned the hood to the best that it loks to me and got it to close on the hood latch and this is what I have (see photos attached) The driver side front fender to hood gap is a little large compared to the passenger side to hood fender gap. Also the driver side front fender seems to protrude out the the hood and the passenger side is even. the other two photos show the gap of the driver and passenger side fenders to cab. There you can see a gap on both and I have the bolts tightened up. So my thoughts for the fenders gap fix is try and move the rad support over to the passenger side to try and even the gaps on the hood to fenders. But just not sure how to get rid of those gaps on the fender to hood area. I know I didn't have those gaps when I took them apart. To me it looks like I may have to bend the medal some to close those gaps. Any ideas would help.
Thanks
Last edited by The Shop Teacher; 04/26/202011:54 PM. Reason: add photos
