The Stovebolt Site Forums The Shop Area Engine Shop shims under bearings

Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
Shaffer's 1950 ranch truck used ALL year

A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (TooMany2count), 87 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,276

Posts1,058,440

Members48,490

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: shims under bearings Ott3r #1353614 04/06/2020 12:43 AM
Joined: Aug 2019 Posts: 242 NM O Ott3r 'Bolter
Ott3r 'Bolter O Joined: Aug 2019 Posts: 242 NM	maybe i need an actual mic... But i did use digital calipers (nice mitutoyos) and got .010" under the minimum end of spec on all 4 journals. The spec has a .001" acceptable range. Last edited by Ott3r; 04/06/2020 12:44 AM. '59 Chevy Suburban, NAPCO

Entire Thread
Subject	Posted By	Posted
shims under bearings	Ott3r	04/05/2020 7:52 PM
Re: shims under bearings	Greg_H	04/05/2020 10:43 PM
Re: shims under bearings	52Carl	04/06/2020 12:04 AM
Re: shims under bearings	Ott3r	04/06/2020 12:20 AM
Re: shims under bearings	Ott3r	04/06/2020 12:29 AM
Re: shims under bearings	klhansen	04/06/2020 12:30 AM
Re: shims under bearings	showkey	04/06/2020 2:07 AM
Re: shims under bearings	klhansen	04/06/2020 2:15 AM
Re: shims under bearings	Ott3r	04/06/2020 12:43 AM
Re: shims under bearings	Hotrod Lincoln	04/06/2020 1:10 AM
Re: shims under bearings	EdPruss	04/06/2020 1:25 AM
Re: shims under bearings	Pre '68 Dave	04/06/2020 1:52 AM
Re: shims under bearings	Hotrod Lincoln	04/06/2020 2:06 AM
Re: shims under bearings	Ott3r	04/06/2020 2:19 AM
Re: shims under bearings	truckernix	04/06/2020 2:25 AM
Re: shims under bearings	showkey	04/06/2020 2:27 AM
Re: shims under bearings	Ott3r	04/06/2020 2:50 AM
Re: shims under bearings	moparguy	04/06/2020 12:34 PM
Re: shims under bearings	Hotrod Lincoln	04/06/2020 1:54 PM
Re: shims under bearings	Dragsix	04/06/2020 7:16 PM
Re: shims under bearings	Ott3r	04/06/2020 8:36 PM
Re: shims under bearings	1Ton_tommy	04/14/2020 11:29 PM
Re: shims under bearings	Dragsix	04/15/2020 12:07 AM
Re: shims under bearings	Hotrod Lincoln	04/15/2020 12:21 AM
Re: shims under bearings	CrowbarBob	04/15/2020 2:46 AM
Re: shims under bearings	tclederman	04/15/2020 10:40 AM
Re: shims under bearings	Phak1	04/15/2020 11:41 AM
Re: shims under bearings	Hotrod Lincoln	04/15/2020 4:50 PM
Re: shims under bearings	Ott3r	04/16/2020 5:14 PM
Re: shims under bearings	Hotrod Lincoln	04/17/2020 2:03 AM
Re: shims under bearings	Dragsix	04/17/2020 3:05 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard