| |
Click on image for the lowdown. 
====
| | |
11 members (Woodcmiami, Hotrod Lincoln, WICruiser, KCMongo, TexasJim50, Bill Hanlon, MNSmith, Chip O, LAROKE, Southerntruck, 1 invisible),
72
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,032 Posts1,055,523 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2009 Posts: 639 'Bolter | | 'Bolter Joined: Nov 2009 Posts: 639 | Wben I put new king pins in I had a tight one on the driver's side. I thought it would get looser with use but it actually got worse. Almost impossible to steer. I talked to an old timer who told me that the very tight tolerance of the new king pins was not allowing grease to get in where it needed to. His solution was to jack the truck up and turn the wheel all the way left, grease the heck out of it, turn the wheel all the way to the right, grease the heck out of it, then set the truck down and do it all over again. It took 2 or 3 days of this but it finally loosened up and works like new. | | |
|
|
| |
