| |
Click on image for the lowdown. 
====
| | |
0 members (),
137
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,211 Posts1,057,475 Members48,473 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2019 Posts: 4,516 AD Addict & Tinkerer | | AD Addict & Tinkerer Joined: Feb 2019 Posts: 4,516 | Soak the fastener in PB blaster or some other penetrant for a few days. That should help dissolve the rust. If that doesn’t work try heating the nut.
In addition to the nut there are spacers between the backing plate and the steering yoke that also get rusted on the bolt. I needed to heat those spacers to get them off too.
Phil Moderator, The Engine Shop, Interiors and Project Journals1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc BrakesProject JournalsStovebolt Gallery Forum | | |
|
|
| |
