Yes sir I actually do have 10lbs wildwood residual valves in line like almost directly out of the mc. I ran my brake lines out of the master cylinder somewhat a 90 degree angle (without pinching them ofcourse) up overtop of my driveshaft close to the cab then over to the passenger side frame rail where they tied into the existing lines front and rear....with that being said I was afraid the lines going above the master was trapping air so I took them off and bent the line to where it wasnt such a hard angle....so right now I dont have any residual valve in the front but it still didn't make any difference when I tried bleeding them..
Last edited by Claytoncraig96; 08/25/2019 12:43 PM.
