Just tore the Rochester Monojet down and put a rebuild kit on it after cleaning out the muck. Didn’t even have any parts leftover. Installed it, seemed like it was gonna work, but couldn’t keep it running. Looked after cranking and the carb covered in gas. inlet line appears tight and no leak (wrapped in paper towel and cranked-inside was dry.

Here’s a video of what’s happening. Seems to want to start then gas comes shooting up from the intake.



Just tried again and didn’t move the throttle. Same thing. Thinking I have a float problem??

Last edited by The Green Farmer; 08/08/2019 12:53 AM. Reason: new info
'69 1/2T stepside, Sea Foam Green, 250 L6 w/ 3 on the tree, not an option on it, in the family since new.