The Stovebolt Site Forums The Shop Area Engine Shop Compression readings

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 44 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,009

Posts1,055,293

Members48,419

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Compression readings David C. #1316898 07/07/2019 7:11 PM
Joined: Dec 2017 Posts: 1,652 Pennsylvania D Dragsix 'Bolter
Dragsix 'Bolter D Joined: Dec 2017 Posts: 1,652 Pennsylvania	I Don’t know about that. Those compression values are not unusual for a 235 with the exception of no. 4. That one is low. If you can get access to a leak down tester, you might leak no.4 and see where the loss is. Mike

Entire Thread
Subject	Posted By	Posted
Compression readings	David C.	07/07/2019 5:56 PM
Re: Compression readings	Fox	07/07/2019 6:19 PM
Re: Compression readings	Dragsix	07/07/2019 7:11 PM
Re: Compression readings	David C.	07/07/2019 9:11 PM
Re: Compression readings	David C.	07/07/2019 11:05 PM
Re: Compression readings	Hotrod Lincoln	07/07/2019 11:08 PM
Re: Compression readings	David C.	07/07/2019 11:44 PM
Re: Compression readings	panic	07/08/2019 12:30 AM
Re: Compression readings	David C.	07/08/2019 1:10 AM
Re: Compression readings	tclederman	07/08/2019 12:35 AM
Re: Compression readings	panic	07/08/2019 2:53 AM
Re: Compression readings	David C.	07/08/2019 3:10 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard