I've been doin a buncha work on my 64 C10 lately. Here's what it looked like when I got it last fall:
[img]
http://chevyasylum.com/64c10/64c10_02r8.jpg[/img]
And this is what it looked like last weekend:
[img]
http://chevyasylum.com/64c10/64c10_281r8.jpg[/img]
This week I started messin around under the hood. This is what I started with:
[img]
http://chevyasylum.com/64c10/64c10_004r8.jpg[/img]
And here's the way it sits as of this afternoon:
[img]
http://chevyasylum.com/64c10/64c10_303r8.jpg[/img]
I'm hopin to have the majority of the stuff done by the last half of August so that I can take it to the Salt Flats for Speed Week and use it as a pit truck.
Oh...the carb is a Carter 625 AFB electric choke on a 292. I figger that if I can run a 600 on a 305 with real good results, I should be able to get by on this setup. If I have to downsize the carb, I'll post something about it.
