Yes, I’ve tried to read the forums first, with no luck
59 gauge cluster needs removal. I’ve unscrewed everything but oil sensor
When I pull on the cluster it only moves about 1/2 inch then clearly stops with a thud. Reaching in behind, it feels like the bezel has a lip all the way around and feeling with one hand, while pulling with the other, I can feel the lip bottom out on the opening.
Am I missing something? It’s not a wire or Speedo causing resistance, this is clearly a metal on metal thud, like the back edge of the bezel is too big for the opening.
I can’t get it out.
Any help?
Thanks
Last edited by Lode51; 03/03/2019 1:11 AM.
