| |
Click on image for the lowdown. 
====
| | |
2 members (Wheelie, Jimmie D),
125
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,195 Posts1,057,374 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2001 Posts: 96 Shop Shark | | Shop Shark Joined: Feb 2001 Posts: 96 | I used a s10 4wd blazer rear on my 46. I had to cut the perches and weld on new ones. A couple of things measure the width I know there are two widths 2 vs 4 wd and I have been told there are 3. Watch the ratios as rears with the OD trans. usually have lower gears. The axle tube are 23/4 vs the older camaro that are 3". Mid late 80's chevrolet they used clips to hold the break wheel cyl vs later models like the early camaro used bolts. | | |
|
|
| |
