| |
Click on image for the lowdown. 
====
| | |
0 members (),
47
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,050 Posts1,055,641 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2000 Posts: 346 Shop Shark | | Shop Shark Joined: Aug 2000 Posts: 346 | Richie,
I had a '56 Chevy pass car rear (57" wide as I recall) under my '49 at one time and I had to put wheel spacers (1" per side) to keep the tires from rubbing on the outside of the bed with any kind of a load. I was using the '56 pass car rims with this rear end.
I put a '69 pass 12-bolt under it after that (60.5" wide) and never had any problems with tires rubbing. I had 15x7 rims from an S-10 with 235-70 tires on it the last few years before I tore it down for the rebuild I'm currently doing. Even heavily loaded, the tires cleared everything alright.
I did mount the shocks inboard of the frame when I changed the rear end so I don't know if they're an issue or not.
'38 Chevy 1-1/2 ton
'49 Chevy 1/2 ton
'54 Chevy 6400 2 ton
'55.2 GMC 3/4 ton
'56 GMC 1-ton
No Room Left in Shop
| | |
|
|
| |
