Hi Fellow Bolters,
I have opened up the driveline on my 1950 half ton truck. I installed a 261 engine with a saginaw 4 speed transmission. I took the 1950 rear axle housing out and took off the original closed driveline mounts. I installed a rebuilt drop out pumpkin from a 1955-62 Chevy half ton truck and new 3.38 gears. I have put the rear axle back in but it is setting to far forward with a standard saddle type leaf spring perch. Do I have to make some custom perches to set the axle back to the stock position? I have the u-bolts made and the heavy plates for underneath the leaf springs. Does someone already make these perches?
Thanks in advance.
Brian
