| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,041 Posts1,055,479 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2017 Posts: 40 'Bolter | | 'Bolter Joined: Apr 2017 Posts: 40 | I used a drill press vise to hold the outer end of the pin and used a 17/64 bit to drill from the back side. That was enough to remove the flair on the back of the pin and it could be pulled out the front after drilling into the pin about 1/4 inch. I then used a bench vise as a press to force the new knobs onto the new pin. Protecting the knob face with a rag Worked great! | | |
|
|
| |
