| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,010 Posts1,055,298 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2013 Posts: 224 'Bolter | | 'Bolter Joined: Dec 2013 Posts: 224 | I have a ‘47 AD 3100 that I believe the PO retrofit a later box to the chassis. I did body work on the right side and added a new angle strip. The left side I simply ordered a new side from Mar-k. The new side fit perfectly.
The issue I’m having is getting the box to measure to specs. The last sill is welded to the original right side. Is the correct procedure simply loosening all bolts and shifting/adjusting the panels so the correct measurements are met? Another words I should just “play” with panels to get it right? Or is there some other point I’m missing? | | |
|
|
| |
