| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,034 Posts1,055,547 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2000 Posts: 2,188 Insomniac | | Insomniac Joined: Jul 2000 Posts: 2,188 | Yes, I used the block. Put a piece of carpet underlay over the hood and put lots of weight on it to push the hood down on to the cowl seal. After tightening the bolts, I lifted the hood, removed the block and after dropping the hood to the closed position, the gap on the driver's side went from about 1/4 inch to over 3/4 inch; enough that you can see the seal showing. Pass side was OK.
Gord 🇨🇦
----
1954 1/2 ton 235 4 speed
| | |
|
|
| |
