| |
Click on image for the lowdown. 
====
| | |
0 members (),
93
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,055 Posts1,055,782 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2007 Posts: 1,038 'Bolter | | 'Bolter Joined: Apr 2007 Posts: 1,038 | Are you missing the pieces or just want to replace? Ordinarily, the brass fitting and the hollow bolt (called a banjo bolt) can be reused. What you call brass washers are copper and it is best to replace these (you can heat these to anneal so they are soft again to allow a good seal). I think a NAPA store or other auto parts store would have these. You would have to be sure the flare fitting on the brass block will be the correct size for your brake line. If you don't have the original parts, take the master cylinder and know what size your brake line is and go to the store to be sure you have a match. | | |
|
|
| |
